Meniu Închidere
Innershield Flux Cored wire, 25 or 30 lb steel spool

Diametre / Ambalaj

Diametre
 4,5 KG SPOOL
 4.5 KG SPOOL
 6.4 KG COIL
 11.3 KG SPOOL
 22.7 KG COIL
 Rola 0.45 KG
0.9 mm ED016354 ED030637 B10283-1
1.1 mm ED016363 ED030638
1.7 mm ED012506 ED030641
2.0 mm ED012508 ED012509

Innershield® NR® -211-MP

Sarma tubulara cu pulberi cu auto-protectie (FCAW-S) | ED030638

CLASIFICARI:
E71T-11
E71T11-AZ-CS3

Innershield® NR-211®-MP de la Lincoln Electric este o sârmă versatilă adecvată pentru sudarea în toate pozițiile a tablelor de calibru mic sau subțiri.

Diametru

Selectare diametru

  • 0.9 mm
  • 1.1 mm
  • 1.7 mm
  • 2.0 mm

Ambalaj

Selectare ambalaj

  • 4.5 KG SPOOL
  • 11.3 KG SPOOL

DETALII

O sarma versatila adecvata pentru sudarea in toate pozițiile a tablelor subtiri sau pentru cerinte de calibre mici . Recomandat pentru grosimea maximă a tablei de la 7,9 mm (5/16’’) până la 12,7 mm (1/2’’).

Caracteristici

  • Capacitate de sudare pe o varietate mare de materiale de baza
  • Atractie mare a sudorilor si aspect bun al cusaturii
  • Detasare usoara a zgurii
  • Caracteristicile de solidificare rapida a zgurii adecvate pentru fixarile deficitare

Informații despre service

Documentație

S-ar putea să aveți nevoie și de

Contact Tip Heavy Duty

Magnum® Contact Tip - Heavy Duty, .045 in (1.2 mm) - 10/pack

KP14H-45
Duplicate

Ghidaj sarma 0,035-0,045 in (0,9-1,2 mm) 15 ft (4,6 m)

KP42-4045-15

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. Pagina de căutare FDS

Consultare rezultat test declinare a responsabilității

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.20 E71T-11
AWS AWS A5.36 E71T11-AZ-CS3
ABS AWS A5.20 E71T-11
CWB CSA W48 E491T-11-AZ-CS3-H16 (E491T-11-H16)
DB ISO 17632-A T 42 Z Z N 1 H10

MECHANICAL PROPERTIES

Classification Polarity Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
%
E71T11-AZ-CS3 Requirement DC- 400 (58) min. 480-660 (70-95) 22 min.
Typical Result, As-welded DC- 420 (61) 570-640 (82-92) 22

DEPOSIT COMPOSITION

Classification Polarity %Al %C %Mn %P %S %Si
E71T11-AZ-CS3 Requirement DC- 0.30 max. 1.75 max. 0.030 max. 0.030 max. 0.60 max.
Typical Result DC- 1.2-1.6 0.15-0.28 0.53-0.79 0.012 0.004 0.13-0.28

TYPICAL OPERATING PROCEDURES

Diameter Polarity CTWD
mm (in.) 		Wire Feed Speed
m/min (in/min) 		Voltage
volts 		Approx. Current
amps 		Melt-off Rate
kg/hr (lb/hr) 		Deposition Rate
kg/hr (lb/hr) 		Efficiency
%
0.030 in (0.8 mm) DC- 13 (1/2) 1.3 (50) 13-14 30 0.2 (0.5) 0.2 (0.4) 81
0.030 in (0.8 mm) DC- 13 (1/2) 2.5 (100) 13-14 60 0.5 (1.1) 0.4 (0.8) 75
0.030 in (0.8 mm) DC- 13 (1/2) 3.8 (150) 14-15 80 0.7 (1.6) 0.6 (1.2) 78
0.030 in (0.8 mm) DC- 13 (1/2) 5.1 (200) 14-15 100 1.0 (2.1) 0.8 (1.7) 81
0.030 in (0.8 mm) DC- 13 (1/2) 6.4 (250) 15-16 130 1.2 (2.6) 1.0 (2.1) 80
0.030 in (0.8 mm) DC- 13 (1/2) 7.6 (300) 18-19 140 1.4 (3.2) 1.2 (2.6) 81
0.035 in (0.9 mm) DC- 13-16 (1/2-5/8) 1.3 (50) 14-15 30 0.4 (0.8) 0.3 (0.7) 81
0.035 in (0.9 mm) DC- 13-16 (1/2-5/8) 1.8 (70) 15-16 60 0.5 (1.2) 0.5 (1.0) 83
0.035 in (0.9 mm) DC- 13-16 (1/2-5/8) 2.8 (110) 16-17 115 0.7 (1.6) 0.6 (1.3) 78
0.035 in (0.9 mm) DC- 13-16 (1/2-5/8) 3.8 (150) 17-18 130 1.0 (2.2) 0.8 (1.7) 78
0.035 in (0.9 mm) DC- 13-16 (1/2-5/8) 5.1 (200) 18-19 155 1.4 (3.0) 1.1 (2.5) 84
0.035 in (0.9 mm) DC- 13-16 (1/2-5/8) 7.0 (275) 20-21 155 2.0 (4.4) 1.5 (3.4) 78
0.045 in (1.1 mm) DC- 16 (5/8) 1.8 (70) 15-16 120 0.7 (1.6) 0.5 (1.1) 69
0.045 in (1.1 mm) DC- 16 (5/8) 2.3 (90) 16-17 140 1.0 (2.2) 0.8 (1.7) 77
0.045 in (1.1 mm) DC- 16 (5/8) 2.8 (110) 17-18 160 1.2 (2.7) 1.0 (2.3) 85
0.045 in (1.1 mm) DC- 16 (5/8) 3.3 (130) 18-19 170 1.5 (3.2) 1.2 (2.7) 84
0.068 in (1.7 mm) DC- 19-32 (3/4-1 1/4) 1.0 (40) 15-16 125 1.0 (2.1) 0.8 (1.7) 81
0.068 in (1.7 mm) DC- 19-32 (3/4-1 1/4) 1.9 (75) 18-19 190 1.8 (4.0) 1.5 (3.4) 85
0.068 in (1.7 mm) DC- 19-32 (3/4-1 1/4) 3.3 (130) 20-21 270 3.2 (7.0) 2.8 (6.1) 88
0.068 in (1.7 mm) DC- 19-32 (3/4-1 1/4) 4.4 (175) 23-24 300 4.3 (9.4) 3.8 (8.4) 89
5/64 in (2.0 mm) DC- 19-32 (3/4-1 1/4) 1.3 (50) 16-17 180 1.6 (3.5) 1.3 (2.9) 83
5/64 in (2.0 mm) DC- 19-32 (3/4-1 1/4) 1.9 (75) 18-19 235 2.4 (5.3) 2.0 (4.5) 85
5/64 in (2.0 mm) DC- 19-32 (3/4-1 1/4) 3.0 (120) 20-21 290 3.8 (8.4) 3.4 (7.4) 88
5/64 in (2.0 mm) DC- 19-32 (3/4-1 1/4) 4.1 (160) 22-23 325 5.1 (11.2) 4.5 (10.0) 89
3/32 in (2.4 mm) DC- 19-32 (3/4-1 1/4) 1.3 (50) 16-17 245 2.3 (5.0) 1.9 (4.2) 84
3/32 in (2.4 mm) DC- 19-32 (3/4-1 1/4) 1.9 (75) 19-20 305 3.4 (7.5) 2.9 (6.4) 85
3/32 in (2.4 mm) DC- 19-32 (3/4-1 1/4) 2.5 (100) 20-21 365 4.5 (10.0) 3.9 (8.7) 87
3/32 in (2.4 mm) DC- 19-32 (3/4-1 1/4) 3.3 (130) 22-23 400 5.9 (12.9) 5.1 (11.3) 88