fluxofil, seamless cored wires

Diameters / Packaging

Diameters
16 KG SPOOL (B300)
200 KG DRUM
1.2 mm W000281216 W000281217
1.6 mm W000281219

FLUXOFIL M 42

Metal-Cored Gas-Shielded (GMAW-C) | W000281219

CLASSIFICATIONS:
AWS A5.29 : E110C-GM H4
EN ISO 18276-A : T 69 4 Mn2NiCrMo M M21 1 H5

Metal cored wire FLUXOFIL M 42 - 1.6MM - 16KG (B300)

DETAILS

FLUXOFIL M 42 is a seamless copper coated metal cored wire for welding of high strength steels with minimum yield strength of 690 MPa with outstanding welding characteristics in the short-arc and spray-arc ranges. Almost spatter-free when welding in the spray-arc range. Good restriking, even with a cold wire tip, thus being suitable for robotic applications. Characteristic features: good side wall fusion, smooth and finely rippled welds without undercut into the base metal. Little formation of silicates on the weld surface, so that multi-pass welds can be made without inter-run cleaning. Due to the easily controllable weld pool in the short-arc range, FLUXOFIL M 42 is suitable for positional welding. 

Features

  • Seamless copper coated metal cored wire for welding of high strength steels with minimum yield strength of 690 MPa.
  • Due to the easily controllable weld pool in the short-arc range, FLUXOFIL M 42 is suitable for positional welding both on CV and pulse modes.
  • Higher deposition rate and more regular weld profile comparing to MAG welding with solid wires.
  • Very good weldability with short, pulsed and spray arc. Suitable for robotic applications.
  • Meets AWS A5.28: E110C-GM H4.

Service Information