Çaplar / Paketleme
|
Çaplar |
(3) 8 lb Easy Open Can |
(3) 10 lb Easy Open Can |
|---|---|---|
| 1/8 x 14 in (3.2 x 350 mm) | ELWLDA125634 | |
| 3/32 x 12 in (2.4 x 300 mm) | ELWLDA093632 | |
| 5/32 x 14 in (4.0 x 350 mm) | ELWLDA156634 |
DETAYLAR
Tech-Rod® offers a wide variety of nickel alloy grades of stick electrodes lot tested with certificates of actual deposit chemistry and typical mechanical results available online
Özellikleri
- Overlay cladding where a similar composition is needed
- For dissimilar welds between nickel-chromium-iron alloys to mild steels or stainless steels
- Q2 Lot® - Certificate showing actual deposit composition available online
Tipik Uygulamalar
- Petrochemical
- High Heat Environments
- For dissimilar welds between nickel-chromium-iron alloys to mild steels or stainless steels
Kaynaklama Konumları
- Polarity DC+
Koruyucu gaz
- N/A
Servis Bilgileri
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Arama sayfası
Test sonucunu görün sorumluluk reddi
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.11 | ENiCrFe-2 |
MECHANICAL PROPERTIES
| Classification |
Tensile Strength
MPa (ksi) |
Elongation
% |
|---|---|---|
| ENiCrFe-2 Requirement | 550 (80) min. | 30 min. |
| Typical Result, As-welded | 659 (95) | 43 |
DEPOSIT COMPOSITION
| Classification | %C | %Cr | %Cu | %Fe | %Mn | %Mo | %P | %S | %Si | %Nb+Ta | %Ni+Co |
|---|---|---|---|---|---|---|---|---|---|---|---|
| ENiCrFe-2 Requirement | 0.10 max. | 13.0 - 17.0 | 0.50 max. | 12.0 max. | 1.0 - 3.5 | 0.5 - 2.5 | 0.03 max. | 0.02 max. | 0.75 max. | 0.5 - 3.0 | 62.0 min. |
| Typical Result | 0.04 | 15.1 | 0.06 | 10.3 | 3.1 | 1.5 | 0.02 | 0.01 | 0.45 | 2.1 | 67.0 |
TYPICAL OPERATING PROCEDURES
| Diameter |
Current
Amps |
|---|---|
| 3/32" (2.4 mm) | 65-85 |
| 1/8" (3.2 mm) | 80-110 |
| 5/32" (4.0 mm) | 100-140 |
| 3/16" (4.8 mm) | 110-160 |