Menu Close
Excalibur 7018-A1 MR

Diameters / Packaging

Diameters
 8 lb (3.6 kg) Easy Open Can
 10 lb (4.5 kg) Easy Open Can
1/8 x 14 in (3.2 x 350 mm) ED033101
3/16 x 14 in (4.8 x 350 mm) ED033103
3/32 x 12 in (2.4 x 300 mm) ED033100
5/32 x 14 in (4.0 x 350 mm) ED033102

Excalibur® 309/309L-17

Stick (SMAW)

AWS:
AWS A5.4 : E309-17
AWS A5.4 : E309L-17

EXCALIBUR® 309/309L-17 is designed for joining stainless steel to mild or low alloy steel, with low carbon levels to help eliminate carbide precipitation on typical applications of industrial and fabrication. (Stainless)

Diamètre

Sélectionnez le diamètre

  • 1/8 x 14 in (3.2 x 350 mm)
  • 3/16 x 14 in (4.8 x 350 mm)
  • 3/32 x 12 in (2.4 x 300 mm)
  • 5/32 x 14 in (4.0 x 350 mm)

Paquet

Sélectionnez un forfait

  • 8 lb (3.6 kg) Easy Open Can
  • 10 lb (4.5 kg) Easy Open Can
Acheter maintenant

Détails

EXCALIBUR® 309/309L-17 flux coating provides for smooth arc transfer in the flat and horizontal positions. Welding positions 5/32 in (4.0 mm) and smaller diameter all except, 3/16 in (4.8 mm) diameter Flat and Horizontal only Vertical Down. Q2 Lot® - Certificate showing actual deposit composition and ferrite number (FN) by ferrite scope available online

Traits

  • Flux coating provides for smooth arc transfer in the flat and horizontal positions
  • Designed with low carbon levels to help eliminate carbide precipitation
  • Q2 Lot® - Certificate showing actual deposit composition and ferrite number (FN) by ferrite scope available online

Applications typiques

  • Designed for joining stainless steel to mild or low alloy steel
  • Industrial & General Fabrication
  • Process Piping

Positions de soudage

  • 3/16 in (4.8 mm) diameter Flat and Horizontal only 5/32 in (4.0 mm) and smaller diameter all except Vertical Down

Gaz de protection

  • N/A

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Des informations de service

Vous pourriez également avoir besoin

SHADOW SPLIT LEATHER-SLEEVED JACKET

Shadow Split Leather Sleeved Welding Jacket - Large

K2986-L
Wearshield SMAW 10 Pound Carton

Wearshield® ABR Stick Electrode (SMAW)

ED021996
Fleetweld 5P+ 14 Stick Electrode in 10 lb can"

Fleetweld® 5P+

ED032565
Excalibur 7018 MR 14 stick electrode"

Excalibur® 7018 MR®

ED032589
Voir tout

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.4 E309-17, E309L-17
ABS AWS A5.4 E309-17, E309L-17
CWB CSA W48 E309-17, E309L-17

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
%
E309-17 Requirement 550 (80) min. 30 min.
E309L-17 Requirement 520 (75) min. 30 min.
Typical Result, As-welded 460-480 (67-69) 600-610 (86-88) 34-41

DEPOSIT COMPOSITION

Classification %Bi %C %Cr %Cu %Mn %Mo %N %Ni %P %S %Si Ferrite Number (per AWS A4.2)
E309-17 Requirement 0.15 max. 22.0 - 25.0 0.75 max. 0.5 - 2.5 0.75 max. 12.0 - 14.0 0.04 max. 0.03 max. 1.00 max.
E309L-17 Requirement 0.04 max. 22.0 - 25.0 0.75 max. 0.5 - 2.5 0.75 max. 12.0 - 14.0 0.04 max. 0.03 max. 1.00 max.
Typical Result 0.001-0.002 0.02-0.03 23.7-24.5 0.06-0.13 0.9-1.0 0.04-0.33 0.08-0.12 12.6-13.1 0.02-0.03 0.01 0.82-0.96 8-15

TYPICAL OPERATING PROCEDURES

Diameter Polarity⁽¹⁾ Current
Amps
3/32 in (2.4 mm) DC+ 40-80
3/32 in (2.4 mm) AC 40-80
1/8 in (3.2 mm) DC+ 75-110
1/8 in (3.2 mm) AC 75-110
5/32 in (4.0 mm) DC+ 95-150
5/32 in (4.0 mm) AC 95-150
3/16 in (4.8 mm) DC+ 130-200
3/16 in (4.8 mm) AC 130-200

NOTES

Note
⁽¹⁾ Preferred polarity is listed first.