Menu Close
Submerged Arc Family

Diameters / Packaging

Diameters
 55 lb Spool
 500 lb Speed Feed® Drum
 600 lb Speed Feed® Reel
 750 lb Speed Feed® Drum
1/8 in (3.2 mm) ED035178 ED036453 ED036605
1/16 in (1.6 mm) ED035180
3/32 in (2.4 mm) ED035177 ED036452 ED034479 ED036603
5/32 in (4.0 mm) ED035179 ED036454
5/64 in (2.0 mm) ED035174

Lincolnweld® 316/316L

Submerged Arc Welding (SAW)

AWS:
AWS A5.9 : ER316
AWS A5.9 : ER316L

Designed to be used primarily with basic fluxes that recover nearly all of the wire chromium in the deposit

Diamètre

Sélectionnez le diamètre

  • 1/8 in (3.2 mm)
  • 1/16 in (1.6 mm)
  • 3/32 in (2.4 mm)
  • 5/32 in (4.0 mm)
  • 5/64 in (2.0 mm)

Paquet

Sélectionnez un forfait

  • 55 lb Spool
  • 500 lb Speed Feed® Drum
  • 600 lb Speed Feed® Reel
  • 750 lb Speed Feed® Drum
Acheter maintenant

Détails

Lincoln Electric's combination of submerged arc wire and flux is designed to produce sizeable weld deposits with exceptional quality and bead appearance

Traits

  • Designed to be used primarily with basic fluxes that recover nearly all of the wire chromium in the deposit
  • The 2-3% molybdenum improves pitting corrosion resistance of the weld deposit
  • Low carbon content recommended where there is a risk of intergranular corrosion

Applications typiques

  • General Fabrication
  • Maintenance and Repair Welding
  • Chemical processing

Positions de soudage

  • Not applicable

Gaz de protection

  • N/A

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Des informations de service

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.9 ER316, ER316L
ISO ISO 14343-B SS316L
ABS AWS A5.9 ER316, ER316L
CWB CSA W48 ER316, ER316L
MIL MIL-E-19933E AMD1 MIL-316L

MECHANICAL PROPERTIES

Flux Classification Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
%
Lincolnweld® P2007™ Typical Result 390 (57) 559 (81) 39

WIRE COMPOSITION

Classification %C %Cr %Cu %Mn %Mo %N %Nb %Ni %P %S %Si Ferrite Number (Delong ©) Ferrite Number (WRC-1992 ©)
ER316L Requirement 0.03 max. 18.0 - 20.0 0.75 max. 1.0 - 2.5 2.0 - 3.0 Info. Only Info. Only 11.0 - 14.0 0.03 max. 0.03 max. 0.30 - 0.65 Info. Only Info. Only
Typical Result 0.01-0.02 18.5-19.1 0.03-0.13 1.4-1.8 2.2-2.6 0.03-0.04 0.01 max. 11.8-12.3 0.02 0.01 max. 0.32-0.40 8-12 7-11

TYPICAL OPERATING PROCEDURES

Diameter Wire Feed Speed
m/min (in/min) 		Voltage
volts 		Approx. Current
amps
5/64 in (2.0 mm) 2.0-6.1 (80-240) 24-30 190-500
3/32 in (2.4 mm) 1.5-5.3 (60-210) 26-32 195-575
1/8 in (3.2 mm) 0.9-2.8 (35-110) 28-34 200-700
5/32 in (4.0 mm) 0.8-1.9 (30-75) 30-36 320-775