Diameters / Packaging
|
Diameters |
25 lb Spool |
|---|---|
| 5/64 in (2.0 mm) | ED035628 |
DETAILS
Iron-based with a large amount of chromium carbides in a hard matrix. These alloys are designed for severe sliding abrasion accompanied by low or moderate impact.
Features
- Better wear characteristics than martensitic only deposit
- Low spatter and easy slag cleanup
- Deposits do not check crack
Typical Applications
- Crusher Roll
- Wear Plate
- Ore Chute
Welding Positions
- Flat/Horizontal
Disclaimers
Service Information
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
MECHANICAL PROPERTIES
| Classification | Hardness Rockwell C | Mass Loss (G65) |
|---|---|---|
| Typical Result | 52-60 | 0.27 |
DEPOSIT COMPOSITION
| Classification | Number of layer | %C | %Cr | %Mn | %Mo | %Si | %Ti | %V |
|---|---|---|---|---|---|---|---|---|
| Typical Result | 4 Layers | 2.5 | 8.5 | 1.3 | 1.9 | 1.5 | 8.6 | 0.4 |
TYPICAL OPERATING PROCEDURES
| Diameter | Polarity |
ESO
mm (in.) |
Wire Feed Speed
m/min (in/min) |
Voltage
volts |
Approx. Current
amps |
|---|---|---|---|---|---|
| 5/64 in (2.0 mm) | DC+ | 38 (1 1/2) | 5.1 (200) | 27 | 260 |