Submerged Arc Family

Diameters / Packaging

Diameters
50 lb Plastic Bag
Flux ED032799

Lincolnweld® 760®

Submerged Arc Welding (SAW)

Highly active welding flux with high resistance to porosity caused by arc blow

Détails

Traits

  • Highly active flux for handling rust and mill scale
  • Helps resist porosity caused by arc blow
  • Slow freezing slag for good weld appearance
  • Actual (Type 3.1) certificates for each lot of flux showing chemical composition, particle size and moisture level are available in the certificate center of lincolnelectric.com
  • Mild Steel Lincolnweld® L-50®, L-60, and L-61®

Applications typiques

  • Single pass welding of mild steel
  • Flat fillet welds with constant voltage power source

Caractéristiques spéciales

  • Basicity Index: 0.8 Density: 1.2 g/cm3

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Vous pourriez également avoir besoin

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

MECHANICAL PROPERTIES

Wire Classification Postweld Heat Treatment Yield Strength @ 0.2% Offset
MPa (ksi)
Tensile Strength
MPa (ksi)
Elongation
%
Charpy V-Notch
J (ft-lbs) @ -20°C (0°F)
Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F)
Lincolnweld® L-50® F7A0-EM13K-H8 As-welded 410 (59) 520 (76) 25 94 (69)
Lincolnweld® L-60 F6A2-EL12-H8 As-welded 380 (55) 450 (65) 31 132 (97)
Lincolnweld® L-61® F7A2-EM12K-H8 As-welded 420 (61) 540 (78) 28 70 (52)

DEPOSIT COMPOSITION

Wire Classification %C %Cu %Mn %P %S %Si Diffusible Hydrogen
mL/100g Weld Metal
Lincolnweld® L-50® F7A0-EM13K-H8 0.03 0.07 1.65 0.018 0.008 0.84 3
Lincolnweld® L-60 F6A2-EL12-H8 0.04 0.07 0.91 0.012 0.009 0.53 2
Lincolnweld® L-61® F7A2-EM12K-H8 0.05 0.12 1.51 0.021 0.009 0.75 2

FLUX COMPOSITION

Classification %Al2O3 %CaF2 %CaO %MgO %MnO %Na2O %SiO2 %Metal Alloys
Typical Result 2 5 1 17 23 2 46 6