Menu Close
Submerged Arc Wire

Diameters / Packaging

Diameters
 60 lb Coil
 60 LB COIL
 1000 LB DRUM
 1000 lb Speed Feed® Drum
1/8 ED500329 ED500335
1/8 in (3.2 mm) ED011743
3/16 ED500331
3/16 in (4.8 mm) ED011748
3/32 ED500328 ED500334
5/32 ED500330 ED500336
5/64 ED500327
5/64 in (2.0 mm) ED011762

Lincolnweld® L-60 Submerged Arc (SAW) Wire

Submerged Arc Welding (SAW) | ED011743

AWS:
EL12

Mild Steel Solid Electrode

Diamètre

Sélectionnez le diamètre

  • 1/8
  • 1/8 in (3.2 mm)
  • 3/16
  • 3/16 in (4.8 mm)
  • 3/32
  • 5/32
  • 5/64
  • 5/64 in (2.0 mm)

Paquet

Sélectionnez un forfait

  • 60 lb Coil
Acheter maintenant

Détails

  • A low carbon, low manganese, low silicon general purpose electrode
  • Provides the lowest hardness and is best suited for use with the Lincolnweld® 700 series of active fluxes

Traits

  • A low carbon, low manganese, low silicon general purpose electrode
  • Provides the lowest hardness and is best suited for use with the Lincolnweld® 700 series of active fluxes
  • Actual (Type 3.1) certificates for each lot of wire showing chemical composition are available in the certificate center of lincolnelectric.com

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Des informations de service

Vous pourriez également avoir besoin

NA-5 Control

Contrôle NA-5

K356-2
NA-4 Control Box

NA-4 Controller

K388-2
LT-7 Tractor

Tracteur LT-7 (modèle sur chenilles)

K395-1
Submerged Arc Wire

Lincolnweld® L-61® Submerged Arc (SAW) Wire

ED011807
Voir tout

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.17 EL12
AWS AWS A5.23 EL12
ISO ISO 14171-A S1
DB ISO 14171-S S1
MIL MIL-E-23765/4 MIL-EL12

WIRE COMPOSITION

Classification %C %Mn %P %S %Si %Total Cu
EL12 Requirement 0.04 - 0.14 0.25 - 0.60 0.030 max. 0.030 max. 0.10 max. 0.35 max.
S1 Requirement 0.05 - 0.15 0.35 - 0.60 0.025 max. 0.025 max. 0.15 max.
Typical Result 0.11 0.48 0.005 0.009 0.07 0.12