Menu Close
Image not found

Diameters / Packaging

Diameters
 33 lb Spool
0.045 in (1.1 mm) ED035381
0.052 in (1.3 mm) ED035382
1/16 in (1.6 mm) ED035383

UltraCore® 91K2C-H Plus Flux-cored (FCAW-G) Wire

Flux-Cored Gas-Shielded (FCAW-G) | ED035383

AWS:
E91T1-K2C-JH4
E91T1-C1A6-K2-H4

UltraCore® 91K2M-H Plus from Lincoln Electric is capable of superior toughness at-60°F

Diamètre

Sélectionnez le diamètre

  • 0.045 in (1.1 mm)
  • 0.052 in (1.3 mm)
  • 1/16 in (1.6 mm)

Paquet

Sélectionnez un forfait

  • 33 lb Spool
Acheter maintenant

Détails

Innovative design capable of superior toughness at-60°F

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Des informations de service

Vous pourriez également avoir besoin

Magnum Pro 250 MIG Welding gun

Magnum® PRO 350 Welding Guns

K2652-2
50 lb Can of Lincoln Electric Stick Electrodes

Excalibur® 8018-C3 MR® Stick (SMAW) Electrode

ED030892
50 lb Can of Lincoln Electric Stick Electrodes

Excalibur® 8018-C3 MR® Stick (SMAW) Electrode

ED030893
Drive Roll and Guide Tube Kit

Drive Roll Kit 1/16 in (1.6 mm) Cored Wire

KP1697-1/16C
Voir tout

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

MECHANICAL PROPERTIES

Classification Shielding Gas Polarity Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -40°C (-40°F) 		Charpy V-Notch
J (ft-lbs) @ -50°C (-60°F)
E91T1-C1A6-K2-H4 Requirement 100% CO2 DC+ 540 (78) min. 620-760 (90-110) 17 min. 27 (20) min.
E91T1-C1P4-K2-H4 Requirement 100% CO2 DC+ 540 (78) min. 620-760 (90-110) 17 min. 27 (20) min.
Typical Result, As-welded 100% CO2 DC+ 580-690 (84-99) 640-730 (92-106) 20-26 76-106 (56-78) 37-122 (27-90)
Typical Result, 1 hour @ 620°C (1150°F) 100% CO2 DC+ 580-620 (84-90) 650-690 (94-100) 23-26 36-98 (27-72)

DEPOSIT COMPOSITION

Classification Shielding Gas Polarity %B %C %Cr %Mn %Mo %Ni %P %S %Si %V Diffusible Hydrogen
mL/100g Weld Metal
E91T1-C1A6-K2-H4 Requirement 100% CO2 DC+ 0.15 max. 0.15 max. 0.50 - 1.75 0.35 max. 1.00 - 2.00 0.030 max. 0.030 max. 0.80 max. 0.05 max. 4 max.
E91T1-C1P4-K2-H4 Requirement 100% CO2 DC+ 0.15 max. 0.15 max. 0.50 - 1.75 0.35 max. 1.00 - 2.00 0.030 max. 0.030 max. 0.80 max. 0.05 max. 4 max.
Typical Result 100% CO2 DC+ 0.002-0.005 0.05-0.07 0.06 max. 1.45-1.73 0.28 max. 1.37-1.58 0.015 max. 0.015 max. 0.24-0.36 0.005 max. 0.9-2.2

TYPICAL OPERATING PROCEDURES

Diameter Shielding Gas Polarity CTWD
mm (in.)⁽¹⁾ 		Wire Feed Speed
m/min (in/min) 		Voltage
volts 		Approx. Current
amps 		Melt-off Rate
kg/hr (lb/hr) 		Deposition Rate
kg/hr (lb/hr) 		Efficiency
%
0.045 in (1.1 mm) 100% CO2 DC+ 19 (3/4) 4.4 (175) 25 - 29 130 1.9 (4.1) 1.7 (3.7) 89-90
0.045 in (1.1 mm) 100% CO2 DC+ 19 (3/4) 6.4 (250) 27 - 31 170 2.6 (5.8) 2.4 (5.2) 89-90
0.045 in (1.1 mm) 100% CO2 DC+ 19 (3/4) 7.6 (300) 28 - 32 195 3.2 (7.0) 2.8 (6.2) 89-90
0.045 in (1.1 mm) 100% CO2 DC+ 19 (3/4) 8.9 (350) 28 - 32 220 3.7 (8.1) 3.3 (7.2) 89-90
0.045 in (1.1 mm) 100% CO2 DC+ 25 (1) 10.2 (400) 28 - 32 225 4.2 (9.2) 3.7 (8.2) 89-90
0.045 in (1.1 mm) 100% CO2 DC+ 25 (1) 11.4 (450) 29 - 33 245 4.7 (10.4) 4.2 (9.2) 89-90
0.045 in (1.1 mm) 100% CO2 DC+ 25 (1) 12.7 (500) 30 - 34 265 5.2 (11.5) 4.6 (10.2) 89-90
0.052 in (1.3 mm) 100% CO2 DC+ 19 (3/4) 3.8 (150) 26 - 30 160 2.1 (4.6) 1.7 (3.8) 82-84
0.052 in (1.3 mm) 100% CO2 DC+ 19 (3/4) 4.4 (175) 26 - 30 180 2.4 (5.4) 2.0 (4.5) 82-84
0.052 in (1.3 mm) 100% CO2 DC+ 19 (3/4) 5.1 (200) 27 - 31 200 2.8 (6.2) 2.3 (5.1) 82-84
0.052 in (1.3 mm) 100% CO2 DC+ 19 (3/4) 5.7 (225) 27 - 31 220 3.2 (7.0) 2.6 (5.8) 82-84
0.052 in (1.3 mm) 100% CO2 DC+ 19 (3/4) 7.0 (275) 28 - 32 255 3.9 (8.5) 3.2 (7.1) 82-84
0.052 in (1.3 mm) 100% CO2 DC+ 25 (1) 7.6 (300) 28 - 32 230 4.2 (9.3) 3.5 (7.8) 82-84
0.052 in (1.3 mm) 100% CO2 DC+ 25 (1) 8.3 (325) 28 - 32 245 4.6 (10.1) 3.8 (8.4) 82-84
0.052 in (1.3 mm) 100% CO2 DC+ 25 (1) 8.9 (350) 29 - 33 255 4.9 (10.9) 4.1 (9.1) 82-84
1/16 in (1.6 mm) 100% CO2 DC+ 19 (3/4) 3.8 (150) 26 - 30 205 2.9 (6.3) 2.4 (5.2) 83-85
1/16 in (1.6 mm) 100% CO2 DC+ 19 (3/4) 4.4 (175) 27 - 31 230 3.4 (7.4) 2.8 (6.2) 83-85
1/16 in (1.6 mm) 100% CO2 DC+ 19 (3/4) 5.1 (200) 27 - 31 250 3.8 (8.4) 3.2 (7.1) 83-85
1/16 in (1.6 mm) 100% CO2 DC+ 19 (3/4) 5.7 (225) 28 - 32 270 4.3 (9.5) 3.6 (8.0) 83-85
1/16 in (1.6 mm) 100% CO2 DC+ 19 (3/4) 7.0 (275) 28 - 32 305 5.3 (11.6) 4.4 (9.8) 83-85
1/16 in (1.6 mm) 100% CO2 DC+ 25 (1) 7.6 (300) 28 - 32 305 5.8 (12.7) 4.9 (10.7) 83-85
1/16 in (1.6 mm) 100% CO2 DC+ 25 (1) 8.3 (325) 29 - 33 320 6.2 (13.7) 5.3 (11.6) 83-85
1/16 in (1.6 mm) 100% CO2 DC+ 25 (1) 8.9 (350) 29 - 33 335 6.7 (14.8) 5.7 (12.6) 83-85

NOTES

Note
⁽¹⁾ To estimate ESO, subtract 1/4 in. (6.0 mm) from CTWD.