Średnica / Opakowanie
|
Średnice |
|---|
Wprowadzenie
Tech-Rod® offers a wide variety of nickel alloy grades of stick electrodes lot tested with certificates of actual deposit chemistry and typical mechanical results available online
Zalety
- Excellent corrosion resistance in oxidizing as well as reducing media in a wide variety of chemical process environments
- Offers an outstanding resistance to stress corrosion cracking, pitting and crevice corrosion
- Better corrosion resistance than 276 and 625
Zastosowania standardowe
- General Fabrication
- Heavy Fabrication
- Dissimilar Metals
Pozycja spawania
- Polarity DC+
Gaz osłonowy
- N/A
Informacje o usługach
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. Strona wyszukiwania kart SDS
Zobacz wynik testu zastrzeżenie
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.11 | ENiCrMo-10 |
MECHANICAL PROPERTIES
| Classification |
Tensile Strength
MPa (ksi) |
Elongation
% |
|---|---|---|
| ENiCrMo-10 Requirement | 690 (100) min. | 25 min. |
| Typical Result, As-welded | 740 (107) | 43 |
DEPOSIT COMPOSITION
| Classification | %C | %Co | %Cr | %Cu | %Fe | %Mn | %Mo | %Ni | %P | %S | %Si | %V | %W |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ENiCrMo-10 Requirement | 0.02 max. | 2.5 max. | 20.0 - 22.5 | 0.50 max. | 2.0 - 6.0 | 1.0 max. | 12.5 - 14.5 | Remainder | 0.03 max. | 0.015 max. | 0.2 max. | 0.35 max. | 2.5 - 3.5 |
| Typical Result | 0.02 | 0.0 | 21.0 | 0.00 | 4.8 | 0.4 | 13.6 | 56.5 | 0.01 | 0.004 | 0.1 | 0.00 | 3.5 |
TYPICAL OPERATING PROCEDURES
| Diameter |
Current
Amps |
|---|---|
| 3/32" (2.4 mm) | 65-85 |
| 1/8" (3.2 mm) | 80-110 |
| 5/32" (4.0 mm) | 100-140 |