DETAILS
SuperGlaze 1100 alloy is designed for applications where high electrical conductivity and chemical storage facilities are essential.
Feature.Products.PDP.DetailsMain.Features
- Alloy 1100 is used where electrical conductivity and chemical storage requirements are essential
- Good hot cracking sensitivity in most applications
- Less welding smut and discoloration
- Relatively soft alloy and used in thin gauge applications.
Feature.Products.PDP.DetailsMain.WeldingPositions
- All except vertical down
Feature.Products.PDP.DetailsMain.ShieldingGas
- 100% Argon Argon / Helium Mixtures Flow Rate: 30 - 50 CFH
Disclaimers
Service Information
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.10 | ER1100 |
WIRE COMPOSITION
| Classification | %Be | %Zn | %Al | %Cu | %Mn | %Si+Fe |
|---|---|---|---|---|---|---|
| ER1100 Requirement | 0.0003 max. | 0.10 max. | 99.00 min. | 0.05 - 0.20 | 0.05 max. | 0.95 max. |
| Typical Result | 0.0000 | 0.00 | 99.71 | 0.09 | 0.00 | 0.18 |
TYPICAL OPERATING PROCEDURES
| Diameter | Shielding Gas |
Gas Flow
L/min (CFH) |
Polarity |
CTWD
mm (in.) |
Wire Feed Speed
m/min (in/min) |
Voltage
volts |
Approx. Current
amps |
|---|---|---|---|---|---|---|---|
| 0.9 mm (.035") | 100% Ar | 14-24 (30-50) | DC+ | 12.7 (¹/₂) - 15.9 (⁵/₈) | 14.9 (585) | 23.3 | 170 |
| Typical Result | 100% Ar | 14-24 (30-50) | DC+ | 12.7 (¹/₂) - 15.9 (⁵/₈) | 8.9 (350) | 25.2 | 195 |
| Typical Result | 100% Ar | 14-24 (30-50) | DC+ | 12.7 (¹/₂) - 15.9 (⁵/₈) | 6.4 (250) | 24.0 | 240 |