Blue Max Stainless Wire

Diameters / Packaging

Diameters
33#SPOOL
.035 MG617035667
.045 MG617045667
1/16 MG617062667

Techalloy® 617

MIG (GMAW) Wire

AWS: ERNiCrCoMo-1

Used for MIG, TIG and SAW welding of nickel-chrome-cobalt-molybdenum alloys

DETAILS

Techalloy® offers a wide variety of nickel alloy grades of MIG, TIG, and SAW welding products lot tested with certificates of actual wire chemistry and typical mechanical results available online

Features

  • The weld metal provides optimum strength and oxidation resistance from 1500°F (815°C) up to 2100°F (1150°C)
  • Used for MIG, TIG and SAW welding of nickel-chrome-cobalt-molybdenum alloys
  • Q2 Lot® - Certificate showing actual wire composition available online

Typical Applications

  • General Fabrication
  • Petrochemical
  • Process Industries

Welding Positions

  • All

Shielding Gas

  • 75% Ar/25% He

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Service Information

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.14 ERNiCrCoMo-1
CWB AWS A5.14 ERNiCrCoMo-1

WIRE COMPOSITION

Classification %Al %C %Co %Cr %Cu %Fe %Mn %Mo %Ni %P %S %Si %Ti
ERNiCrCoMo-1 Requirement 0.8 - 1.5 0.05 - 0.15 10.0 - 15.0 20.0 - 24.0 0.50 max. 3.0 max. 1.0 max. 8.0 - 10.0 Remainder 0.03 max. 0.015 max. 1.0 max. 0.60 max.
Typical Result 1.4 0.07 11.6 22.9 0.02 0.5 0.3 8.8 54 0.003 max. 0.003 max. 0.0 max. 0.36

TYPICAL OPERATING PROCEDURES

Diameter Shielding Gas Polarity Voltage
volts
Approx. Current
amps
.035" (0.9 mm) 75% Ar, 25% He DC+ 26-29 150-190
.045" (1.1 mm) 75% Ar, 25% He DC+ 28-32 180-220
1/16" (1.6 mm) 75% Ar, 25% He DC+ 29-33 200-250