Excalibur 7018 MR 14 stick electrode"

Diameters / Packaging

Diameters
10#CAN/30#CTN
1/8 ED035015
3/16 ED035018
5/32 ED035016

Excalibur® 410NiMo-16

Stick (SMAW)

AWS: E410NiMo-16

Great for overlay on carbon and low alloy steels

DETAILS

Excalibur® stainless stick electrodes deliver exceptional puddle control, a smooth arc, and excellent slag release

Features

  • Preheat and inter-pass temperatures greater than 300°F (150°C) are recommended during welding
  • Great for overlay on carbon and low alloy steels
  • Post-weld heat treatment should not exceed 1150°F (620°C) as higher temperatures may result in hardening

Typical Applications

  • Turbines
  • Valve Bodies
  • Offshore

Welding Positions

  • All except vertical down

Shielding Gas

  • N/A

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.4 E410NiMo-16

MECHANICAL PROPERTIES

Classification Tensile Strength
MPa (ksi)
Elongation
%
E410NiMo-16 Requirement 760 (110) min. 15 min.
Typical Result, 1 hour @ 605°C (1125°F) 940-980 (136-142) 18-20

DEPOSIT COMPOSITION

Classification %C %Cr %Cu %Mn %Mo %Ni %P %S %Si
E410NiMo-16 Requirement 0.06 max. 11.0 - 12.5 0.75 max. 1.0 max. 0.40 - 0.70 4.0 - 5.0 0.04 max. 0.03 max. 0.90 max.
Typical Result 0.04 11.4-11.8 0.07 0.5 0.61-0.65 4.6-4.7 0.03 0.01 0.19-0.25

TYPICAL OPERATING PROCEDURES

Diameter Polarity⁽¹⁾ Current
Amps
3/32 in (2.4 mm) DC+ 40-80
3/32 in (2.4 mm) AC 40-80
1/8 in (3.2 mm) DC+ 75-110
1/8 in (3.2 mm) AC 75-110
5/32 in (4.0 mm) DC+ 95-150
5/32 in (4.0 mm) AC 95-150
3/16 in (4.8 mm) DC+ 130-200
3/16 in (4.8 mm) AC 130-200

NOTES

Note
⁽¹⁾ Preferred polarity is listed first.