Automation Software

Water Cooled Torch Cable Assembly, KUKA KR8R1420HW

Water Cooled Torch Cable Assembly, Motoman MA1440

External Dress Break-Away Disk (Fanuc iB)

Cable Assembly Magnum PRO ABB 2600ID-15/1.85

Magnum® PRO Breakaway Disk for FANUC iD

Thru-Arm Break-Away Disk, ABB IRB 1520ID

Water Cooled Torch Cable Assembly, ABB IRB 2600ID-15/1.85

External Dress Break-Away Disk (Fanuc 50 iC)

Thru-Arm Replacement Cable Assembly Fanuc 100iD

Torch Mount Assembly ABB 2600 22 degree

Cable Assembly Thru-Arm KUKA KR8-R2100-HW

Designed to mount the External Dress torch in the proper orientation for the application and fixturing presented to the robot. Consult Automation Division for correct mounting kit selection assistance.

Water Cooled Torch Cable Assembly, ABB IRB 1660ID

Thru-Arm Replacement Cable Assembly ABB 1600ID

External Dress Break-Away Disk (Fanuc iC)

Torch Mount Assembly ABB 2600 45 degree

Lincoln Electric project based lessons offer instructors with projects to encourage active inquiry and higher-level thinking.

Water Cooled Torch Cable Assembly, Motoman MA2010

Designed to mount the External Dress torch in the proper orientation for the application and fixturing presented to the robot. Consult Automation Division for correct mounting kit selection assistance.

The DeviceNet Interface is a Controller Area Network (CAN) BUS-based interface. DeviceNet Hardware must be purchased separately.

Extended axes are the available axes controlled by the robot controller beyond the standard number of robot axes.

Allows users to load text versions of Teach Pendant programs directly on the robot controller without converting the files to binary using WinOLPC.

Provide capability to browse remote web pages via Ethernet. Also provides CGTP functionality.

Data Monitor can monitor and record important process parameters. It can alert you to a parameter going out of limit and it can record data for use in a quality record. Data Monitor operates much like a strip chart recorder or a data acquisition system. Note: Does not collect travel distance information for 2nd robot of a Dual ARM configuration

CellCal recovers cell frame for a new fixture change and allows transfer of robot programs between similar workcells.