50lb Coil Ultracore 70C

Diameters / Packaging

Diameters
50 lb (22.7kg) Coil
600 lb (272 kg) Speed-Feed® Drum
1/8 in (3.2 mm) ED019881 ED019884
3/32 in (2.4 mm) ED019880 ED019883
5/32 in (4.0 mm) ED019885

Lincore® 35-S Metal-Cored Submerged Arc (SAW) Wire

Metal-Cored Submerged Arc (SAW) | ED019881

LINCORE® 35-S Metal-Cored Submerged Arc Wire is designed for mild and low alloy steels, intended for rolling and sliding with unlimited deposit thickness (Metal-to-Metal)

DETAILS

LINCORE® 35-S ideal for tractor rollers, idlers, trunnions, crane wheels, mine car wheels, track rails, shafts and bearing journals for moderate impact and abrasion applications during automatic and semiautomatic operations.

Features

  • Intended for rolling and sliding metal-to-metal wear with moderate impact and abrasion
  • For automatic and semiautomatic operation on mild and low alloy steels
  • Recommended as final overlay where medium hardness and good machinability are required
  • Unlimited deposit thickness with proper preheat and interpass temperatures and procedures

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

You May Also Need

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

MECHANICAL PROPERTIES

Flux Classification Hardness Rockwell C
Lincolnweld® 801® Typical Result 39

DEPOSIT COMPOSITION

Flux Classification %C %Cr %Mn %Mo %Si
Lincolnweld® 801® Typical Result 0.19 2.3 1.7 0.5 0.6

TYPICAL OPERATING PROCEDURES

Diameter Polarity Wire Feed Speed
m/min (in/min)
Voltage
volts
Approx. Current
amps
1/8 in (3.2 mm) DC+ 1.3 (50) 28 340
1/8 in (3.2 mm) DC+ 2.5 (100) 28 500
1/8 in (3.2 mm) DC+ 3.8 (150) 28 660