LINCOLN ER70S-2 Cut Length TIG Electrode

Diameters / Packaging

Diameters
5 KG CARTON BOX
10 lb Carton
1.6 mm ED701966
1/8 in (3.2 mm) ED031110
1/16 in (1.6 mm) ED031108
2.0 mm ED702518
2.4 mm ED702387
3.2 mm ED701967
3/32 in (2.4 mm) ED031109
4.0 mm ED702585

SuperGlaze® 5356 TIG (GTAW) Cut Lengths

TIG (GTAW) | ED031108

AWS:
AWS A5.10 : R5356

SuperGlaze® 5356 is very commonly used for higher strength welding of 5XXX and 6XXX base materials

DETAILS

Alloy 5356 TIG is used when 40,000 PSI is not a requirement. Suitable for all position non- heat treatable welding applications and recommended for welding 5XXX or 6XXX cast and wrought aluminum alloys

Features

  • Excellent for color matching after anodizing
  • General purpose filler alloy for 5XXX and 6XXX series alloys
  • Most widely used aluminum-magnesium welding alloy
  • High strength filler metal
  • Alloy embossed on each rod for easy identification

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

You May Also Need

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.10 ER5356

WIRE COMPOSITION

Classification %Be %Cr %Cu %Fe %Mg %Mn %Si %Ti %Zn
ER5356 Requirement 0.0003 max. 0.05 - 0.20 0.10 max. 0.40 max. 4.5 - 5.5 0.05 - 0.20 0.25 max. 0.06 - 0.20 0.10 max.
Typical Result 0.0002 max. 0.12 0.00 0.11 4.9 0.12 0.06 0.10 0.01