Innershield/Outershield/Submerged Arc Wire

Diameters / Packaging

Diameters
25 lb Spool
50 lb Coil
500 lb Accu-Trak® Drum
0.045 in (1.1 mm) EDS01702 ED028123
0.068 in (1.7 mm) ED012186
1/16 in (1.6 mm) ED029066

Innershield® NR®-152

Flux-Cored Self-Shielded (FCAW-S) | ED012186

AWS:
E71T-14
E71T14S

Innershield® NR®-152 from Lincoln Electric is designed for high speed welding of specialty coated steels.

DETAILS

Designed for high speed welding of specialty coated steels. Recommended for single pass welding on material thicknesses from 0.8 to 4.8 mm (0.030 to 3/16 in).

Features

  • Designed for high speed welding of specially coated steels
  • Soft, consistent arc
  • Porosity resistant
  • Excellent overlapping capabilities
  • Ideal for robotic applications
  • Warning: NR-5 is NOT recommended for welding multiple passes.
  • Notes: The preferred drag angle is 15°, however, NR-152 is capable of welding at zero drag angle, facilitating easy fixturing in automatic applications.

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

You May Also Need

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.20 E71T-14
AWS AWS A5.36 E71T14S

MECHANICAL PROPERTIES

Classification Polarity Transverse Tensile Strength
MPa (ksi)
Longitudinal Face Bend
E71T-14 Requirement DC- 480 (70) min. No opening in excess of 1/8 inch
E71T14S Requirement DC- 480 (70) min. No opening in excess of 1/8 inch
Typical Result, As-welded DC- 530-570 (76-83) Passed

DEPOSIT COMPOSITION

Classification %Al %C %Mn %P %S %Si
Typical Result 2.0-3.9 0.34 1.13 0.016 0.003 0.27

TYPICAL OPERATING PROCEDURES

Diameter Polarity CTWD
mm (in.)
Wire Feed Speed
m/min (in/min)
Voltage
volts
Approx. Current
amps
Melt-off Rate
kg/hr (lb/hr)
Deposition Rate
kg/hr (lb/hr)
Efficiency
%
1/16 in (1.6 mm) DC- 16 (5/8) 0.8 (30) 13-14 90 0.5 (1.3) 0.5 (1.2) 92
1/16 in (1.6 mm) DC- 16 (5/8) 1.0 (40) 14-15 115 0.8 (1.8) 0.7 (1.6) 88
1/16 in (1.6 mm) DC- 16 (5/8) 1.3 (50) 15-16 140 0.9 (2.2) 0.9 (2.0) 90
1/16 in (1.6 mm) DC- 16 (5/8) 1.8 (70) 16-17 185 1.4 (3.1) 1.3 (2.8) 90
1/16 in (1.6 mm) DC- 16 (5/8) 2.8 (110) 19-20 265 2.1 (4.8) 2.0 (4.4) 91
0.068 in (1.7 mm) DC- 19 (3/4) 0.8 (30) 13-14 68 0.7 (1.6) 0.6 (1.4) 87
0.068 in (1.7 mm) DC- 19 (3/4) 1.0 (40) 13-14 95 0.9 (2.2) 0.9 (1.9) 86
0.068 in (1.7 mm) DC- 19 (3/4) 1.3 (50) 14-15 120 1.2 (2.7) 1.1 (2.4) 88
0.068 in (1.7 mm) DC- 19 (3/4) 1.5 (60) 15-16 145 1.4 (3.3) 1.3 (2.9) 87
0.068 in (1.7 mm) DC- 19 (3/4) 2.0 (80) 16-17 190 1.9 (4.4) 1.8 (3.9) 88
0.068 in (1.7 mm) DC- 19 (3/4) 2.8 (110) 20-21 240 2.7 (6.0) 2.4 (5.4) 90