Diameters / Packaging
|
Diameters |
33 lb (15 kg) Steel Spool |
|---|---|
| 0.035 in (0.9 mm) | MG208035667 |
| 0.045 in (1.1 mm) | MG208045667 |
| 1/16 in (1.6 mm) | MG208062667 |
DETAILS
TECHALLOY® 208 is ideal for dissimilar joints between nickel or nickel alloys to stainless or ferrite steels, high nickel alloy with Al and Ti for sound deposits Used for dissimilar joints between nickel or nickel alloys to stainless or ferritic steels.
Features
- High nickel alloy with Al and Ti for sound deposits
- Q2 Lot® - Certificate showing actual wire composition available online
- Q2 Lot® - Certificate showing actual wire composition available online
Disclaimers
Service Information
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.14 | ERNi-1 |
| CWB | AWS A5.14 | ERNi-1 |
WIRE COMPOSITION
| Classification | %Al | %C | %Cu | %Fe | %Mn | %P | %S | %Si | %Ti | %Ni+Co |
|---|---|---|---|---|---|---|---|---|---|---|
| ERNi-1 Requirement | 1.5 max. | 0.15 max. | 0.25 max. | 1.0 max. | 1.0 max. | 0.03 max. | 0.015 max. | 0.75 max. | 2.0 - 3.5 | 93.0 min. |
| Typical Result | 0.1 | 0.01 | 0.01 | 0.01 max. | 0.4 | 0.003 max. | 0.003 max. | 0.40 | 3.0 | 96.0 |
TYPICAL OPERATING PROCEDURES
| Diameter | Shielding Gas | Polarity |
Voltage
volts |
Approx. Current
amps |
|---|---|---|---|---|
| .035" (0.9 mm) | 75% Ar, 25% He | DC+ | 24-29 | 180-200 |
| .045" (1.1 mm) | 75% Ar, 25% He | DC+ | 26-30 | 250-270 |
| 1/16" (1.6 mm) | 75% Ar, 25% He | DC+ | 29-33 | 200-250 |