Menu Close
Stem package of Lincolnweld submerged arc wire

Diameters / Packaging

Diameters
 60 lb Coil
 1000 lb Speed Feed® Drum
 2200 lb Speed Feed® Stem
1/8 in (3.2 mm) ED011323 ED011322 ED033481
3/32 in (2.4 mm) ED011328 ED011327
5/32 in (4.0 mm) ED011332 ED011331 ED032997
5/64 in (2.0 mm) ED011335 ED011334

Lincolnweld® L-50®

Submerged Arc Welding (SAW) | ED033481

CLASSIFICATIONS:
EM13K

Mild Steel Solid Electrode

Diameter

Select Diameter

  • 1/8 in (3.2 mm)
  • 3/32 in (2.4 mm)
  • 5/32 in (4.0 mm)
  • 5/64 in (2.0 mm)

Package

Select Package

  • 60 lb Coil
  • 1000 lb Speed Feed® Drum
  • 2200 lb Speed Feed® Stem
Buy Now

DETAILS

  • A low carbon, medium manganese, medium silicon wire
  • Pair it with Lincolnweld® 980™ flux for the best flux/wire combination when semiautomatic submerged arc welding

Features

  • Industry standard for submerged arc welding applications
  • A low carbon, medium manganese, low silicon general purpose submerged arc electrode
  • A good choice for a wide range of applications with single or multiple pass subarc welding
  • Actual (Type 3.1) certificates for each lot of wire showing chemical composition are available in the certificate center of lincolnelectric.com

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Service Information

You May Also Need

NA-5 Control

NA-5 Control

K356-2
NA-4 Control Box

NA-4 Controller

K388-2
LT-7 Tractor

LT-7 Tractor (Track Model)

K395-1
500 lb Accu-Trak Drum, 600 lb Accu- Trak Drum, 1000 Accu-Pak Drum

SuperArc® L-50®

ED011316
View All

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.17 EM13K
ISO ISO 14171-B SU25
MIL MIL-E-23765/1D MIL-70S-3
MIL MIL-E-23765/1E MIL-70S-3

WIRE COMPOSITION

Classification %C %Mn %P %S %Si %Total Cu
EM13K Requirement 0.06 - 0.16 0.90 - 1.40 0.030 max. 0.030 max. 0.35 - 0.75 0.35 max.
SU25 Requirement 0.06 - 0.16 0.90 - 1.40 0.030 max. 0.030 max. 0.35 - 0.75 0.40 max.
Typical Result 0.11 1.20 0.008 0.004 0.43 0.13